Lab Topology:
Lab Requirements:
1. On the router port, set the IP address to 202.119.249.219 and mask to 255.255.255.0.
2. Set the router prompt message to welcome to router CCNAlab.
3 Set the router port prompt message to this is a serial port
4. Save the settings.
Lab Process:
Router>enable
Router#configure terminal
Router(config)#interface fastethernet 0/0
Router(config-if)#ip address 202.119.249.219 255.255.255.0 / set the IP address of fast Ethernet port fa0/0
Router(config-if)#no shutdown / activate the interface
Router(config-if)#exit
Router(config)#banner motd @ / set the login greeting
Enter TEXT message. End with the character ‘@’.
welcome to router CCNAlab @
Router(config)#interface serial 0
Router(config-if)#description this is a serial port / set port description
Router(config-if)#end
Router#copy running-config startup-config / save the settings
Destination filename [startup-config]?
Building configuration…
[OK]
