The following 10-20 minutes Quick Learning Modules are focused on a specific lesson or topic from the current ICND1 curriculum.
This content is only accessible by Registered Users. If you have not yet registered, you will be prompted to register, before proceeding to access this content.
Exploring Wireless Networking
Upon completing this lesson, you should be able to:
· Understand the Market trends
· Differences between WLAN and LAN
· Describe Radio Frequency Transmission
· Identify Organizations which define WLAN (ITU-R, IEEE, WiFi Alliance)
Enabling RIP
Upon completing this QLM, you will be able to:
· Describe the operation, benefits, and limitations of static and dynamic routing.
· Describe the purpose, types, and classes of dynamic routing protocols
· Describe the different classes of routing protocols
· Describe how a distance vector routing protocol selects routes and maintains routing information
· Describe the features of RIP
· Describe the differences between RIPv1 and RIPv2
· Describe the tasks required to enable a dynamic routing protocol on a Cisco router
· Describe the configuration tasks needed to enable basic RIP routing on a Cisco router
· Use the show commands to verify the RIP configuration
· Describe the use of the debug ip rip command
Understanding the TCP/IP Internet Layer
Upon completing this QLM, you will be able to:
· Identify the characteristics of the Internet Protocol
· Describe the components and structure of an IPv4 address
· Describe the classes of IP addresses
· Describe reserved IP addresses
· Compare public and private IP addresses
· Define the function of DHCP and DNS in IP addressing
· Identify common tools to determine the IP address of a host
Cisco Security Device Manager
This lesson will be an introduction of the Cisco Security Device Manager.
Internet Connections with NAT and PAT
This lesson will be an introduction of Internet Connections with NAT and PAT.
