R&S Quick Notes – Security & IP Services

Security

• Know how to use extended access-lists in distribute-lists, see Brian McGahan @INE article.
• Know how to use extended access-lists instead of prefix-lists, see Brian Dennis @ INE article.
• Know your binary voodoo as Scott Morris @ INE calls it, Part I & Part II.
• Dont forget to allow IGP's, BGP, Multicast , IPv6 and any other needed protocols when adding ACL to a interface.
• Know when to use the “established” keyword.
• When matching Multicast traffic in a extended ACL, remember that Multicast traffic can NEVER be a source.
• Allowing Telnet to a local router on a port other then 23: Option 1- Rotary command or Option 2- Port NAT.
• NBAR can be used if you not forbidden from using ACL's.  You can also map undefined custom ports with “ip nbar port-map custom”
• Dynamic ACL time-outs specified in the acl:  “dynamic NAME timeout {x} permit tcp any any eq 80″.
• When configuring SSH, don't forget to specify a Domain-name and generate your RSA keys.

IP-Services

• “no service config” – Disables the router from auto-answering for tftp config files
• WCCP uses udp port 2048 and protcol 47-GRE
• If talk about router discovery > IRDP
• DNS server config : “ip dns server” & “ip host”
• DNS client config : “ip domain-lookup” & “ip name-server”
• DHCP stands for Dont Hit Computer People
• DHCP option-82 = dhcp-relay.
• DHCP option-66 = Hand out IP address off TFTP server
• When configuring DHCP and earlier in the swithcing section you configured DHCP snooping you must enable the port connecting to the DHCP server as trusted.
• Incase DHCP was configured you need either “no ip dhcp snooping info option” on the switch OR “ip dhcp relay information trust” on the dhcp router.
• HSRP timers only need to be configure on one of the participating routers.
• HSRP uses UDP port 1984.
• When using HSRP with earlier configured port-security, you might need to allow you HSRP MAC 0000.0c07.acxx – where XX is the group number in hex.