This page was exported from Free Cisco Training & Resources - Certification Exam Preparation [ https://www.ciscobibles.com ] Export date:Thu Mar 13 5:54:40 2025 / +0000 GMT ___________________________________________________ Title: CCNA ICND1 Lab9 - Layer 3 Switch and Proxy Server --------------------------------------------------- Lab Tips: An enterprise LAN often uses private IP addresses. A private IP address must be translated to a public IP address before connecting to the Internet. When a layer 3 switch replaces a router, because the layer 3 switch does not have the NAT function, a proxy server is required. Lab Requirements: 1. Complete the configuration as the figure requires. 2. Segment the VLAN into two VLANs. Enable layer 3 routing. Specify a gateway for every VLAN. Note: 1. The CCNA lab does not require proxy server configuration. 2. PC configuration is omitted. Lab Process: P4S-R#configure terminal                      / Enter the VLAN database P4S-R(vlan)#vlan 1 P4S-R(vlan)#name router1                        / Name vlan1 router1 P4S-R(vlan)#vlan 2 P4S-R(vlan)#name router2                  / Name vlan2 router2 P4S-R(vlan)#exit P4S-R(config)#ip routing                        / Enable the IP routing of the switch P4S-R(config)#interface fastehternet0/2 P4S-R(config-if)#ip address 192.168.2.1 255.255.255.0 P4S-R(config-if)#no shutdown P4S-R(config-if)#exit P4S-R(config)#interface fastehternet0/1 P4S-R(config-if)#ip address 192.168.1.1 255.255.255.0 P4S-R(config-if)#no shutdown P4S-R(config-if)#exit P4S-R(config)#ip router 0.0.0.0 0.0.0.0 192.168.1.2 Configure the static route --------------------------------------------------- Images: --------------------------------------------------- --------------------------------------------------- Post date: 2010-08-09 11:55:02 Post date GMT: 2010-08-09 03:55:02 Post modified date: 2010-08-09 11:55:02 Post modified date GMT: 2010-08-09 03:55:02 ____________________________________________________________________________________________ Export of Post and Page as text file has been powered by [ Universal Post Manager ] plugin from www.gconverters.com